Casting Gate Valve


Applicable Standards

· Nominal Dimension: Casting Valve: 2”-48”

· Material:DI, CS, SS, DSS,LTCS, Inconel ,Monel, Bronze,Aluminum Bronze

· Design Standard: API 6D, API 600, DIN3352, ASME B16.34

· Operation type: Manual,Gear,  Electric Actuator, Pneumatic Actuator, Hydraulic actuator

· Nominal Pressure: Class 150-2500

· Connection type: RF,RTJ,FF, SW, NPT, BW,ETC.

· Forged T-Head stem.

· Outside screw & yoke, Non-rising stem. Special design for Fugitive emission testing

· Structure: Flexible or parallel slide wedge, fully guide, Bolted Bonnet, Welded Bonnet, Pressure seal.


Detailed Product Description

Size: 2"~ 48" , DN 50-1200mm

Pressure :150 -2500LB, PN 10~400

Material :Carbon steel,AlloySteel, Duplex /Stainless Steel


Design Feature:

1.Bolt bonnet .

2.Casting body.

3.Full port or reduced port design.

4.Back seal design.

5.Stem is one-piece wrought material.

6.Flexible wedge gate , Solid wedge gate.

7.Outside Screw and Yoke .

8.Rising stem

9.welding Seat.

10.Special request : Locking device ,Position indicator.Limit Switch.


Product Range :

1.Size: NPS 2”~ 48” , DN 50-1200

2.Pressure Rating: Class 150 -2500 LB , PN 10~400

3.Design standard:API 600 ,ASME B16.34,ISO 10432,EN1984.

4.Face To Face Dimension: ASME B16.10,EN 558-1,EN 12982

5.Connecting Dimensions : ASME B16.5 , ASME B16.47, ASM B 16.25 , EN 1092-1 , EN 12627.

6.End Connection : Flange, BW .

7.Body Materials : Carbon steel , Alloy Steel,Duplex/ Stainless Steel , Special Alloy .


Technical sepcification


Design referenceAPIASME
Design standardAPI6DASME B16.34
Flanged endsThread endsSocket welded ends
ASME B16.10ASME B16.11ASME 1.20.1
Flanged endsASME B16.5
Test & InspectionAPI598


Applicable Standards

· Nominal Dimension: Casting Valve: 2”-48”

· Material:DI, CS, SS, DSS,LTCS, Inconel ,Monel, Bronze,Aluminum Bronze

· Design Standard: API 6D, API 600, DIN3352, ASME B16.34

· Operation type: Manual,Gear,  Electric Actuator, Pneumatic Actuator, Hydraulic actuator

· Nominal Pressure: Class 150-2500

· Connection type: RF,RTJ,FF, SW, NPT, BW,ETC.

· Forged T-Head stem.

· Outside screw & yoke, Non-rising stem. Special design for Fugitive emission testing

· Structure: Flexible or parallel slide wedge, fully guide, Bolted Bonnet, Welded Bonnet, Pressure seal.


Detailed Product Description

Size: 2"~ 48" , DN 50-1200mm

Pressure :150 -2500LB, PN 10~400

Material :Carbon steel,AlloySteel, Duplex /Stainless Steel


Design Feature:

1.Bolt bonnet .

2.Casting body.

3.Full port or reduced port design.

4.Back seal design.

5.Stem is one-piece wrought material.

6.Flexible wedge gate , Solid wedge gate.

7.Outside Screw and Yoke .

8.Rising stem

9.welding Seat.

10.Special request : Locking device ,Position indicator.Limit Switch.


Product Range :

1.Size: NPS 2”~ 48” , DN 50-1200

2.Pressure Rating: Class 150 -2500 LB , PN 10~400

3.Design standard:API 600 ,ASME B16.34,ISO 10432,EN1984.

4.Face To Face Dimension: ASME B16.10,EN 558-1,EN 12982

5.Connecting Dimensions : ASME B16.5 , ASME B16.47, ASM B 16.25 , EN 1092-1 , EN 12627.

6.End Connection : Flange, BW .

7.Body Materials : Carbon steel , Alloy Steel,Duplex/ Stainless Steel , Special Alloy .


Technical sepcification


Design referenceAPIASME
Design standardAPI6DASME B16.34
Flanged endsThread endsSocket welded ends
ASME B16.10ASME B16.11ASME 1.20.1
Flanged endsASME B16.5
Test & InspectionAPI598


Message Board
*Name
*E-Mail
*Message